MCCS-SYS-1


Manual Conformal Coating System
? Spray and dispense from one reservoir

Description of System Operation:
1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied to valve handles.
3. Air pressure is applied to feed material to valves.
4. Triggers on handles are depressed to begin dispensing.
5. Fluid pressure is adjusted to control flow.
Spray Valve
6. Stroke adjuster on valve can be adjusted to control flow rate.
7. Atomizing air pressure is adjusted to spray material.
Dispense Valve
9. Stroke adjuster on valve can be adjusted to control flow rate.

PVA also offers optional accessories for this system.
▲ Two solvent stands to hold valve handles
▲ FCS1-SP, spray valve spare parts kit
▲ FC1-SP, dispense valve spare parts kit
▲ B62-0800-SP, system spare parts kit

 

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valves
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Lines
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME
1 Gallon Maximum

DISPENSE MODE:
Manual

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

FIRST VALVE HEAD:
Flat Spray Cap

ATOMIZING AIR PRESSURE:
1 PSI ?- 15 PSI

SECOND VALVE TIP:
Luer-LokTM Adapter

SUPPLY VOLTAGE:
None