CA100-1LB-1-S




Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Flexible stand is adjusted for desired height.
5. Foot pedal is depressed to begin dispense.
6. Fluid pressure is adjusted to control flow.
7. Stroke adjuster on valve can be adjusted for flow rate.
8. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.

▲ CA1-SP, valve spare parts kit
▲ B62-0764-SP, system spare parts kit

 

SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Drop in Bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Pound (500 gm) Bottle Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
1 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

CA200-1LT-1-S


 

Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Flexible stand is adjusted for desired height.
5. Foot pedal is depressed to begin dispense.
6. Fluid pressure is adjusted to control flow.
7. Stroke adjuster on valve can be adjusted for flow rate.
8. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.

▲ CA2-SP, valve spare parts kit
▲ B62-0765-SP, system spare parts kit

 



SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Drop in Bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Liter Bottle Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
20 PSI - 100 PSI
SUPPLY VOLTAGE:
110 volt / 220 volt

 

 

CAM100-1G-1


 

Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Foot pedal is depressed to begin dispense.
5. Fluid pressure is adjusted to control flow.
6. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve tip in solvent
▲ CAM1-SP, valve spare parts kit
▲ B62-0717-SP, system spare parts kit

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Gallon Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
1 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

CAM100-1LB-1


 

Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Foot pedal is depressed to begin dispense.
5. Fluid pressure is adjusted to control flow.
6. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve tip in solvent
▲ CAM1-SP, valve spare parts kit
▲ B62-0696-SP, system spare parts kit


 

SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Drop in Bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Pound (500 gm) Bottle Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
1 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

CAM100-1LT-1-FS


 

Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Finger switch is depressed to begin dispense.
5. Fluid pressure is adjusted to control flow.
6. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve tip in solvent
▲ CAM1-SP, valve spare parts kit
▲ B62-0747-SP, system spare parts kit


 

SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Drop in bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Liter Bottle Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
1 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

CAM200-1G-1


 

Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied to material.
3. Lever on valve is depressed to begin dispense.
4. Fluid pressure is adjusted to control flow.
5. Stroke adjuster on valve can be adjusted for flow rate.

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve tip in solvent
▲ CAM2-SP, valve spare parts kit
▲ B62-0761-SP, system spare parts kit

 

 

SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Gallon Maximum

DISPENSE MODE:
Manual

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
None

SUPPLY VOLTAGE:
None

CAM200-1LB-1


Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied to material.
3. Lever on valve is depressed to begin dispense.
4. Fluid pressure is adjusted to control flow.
5. Stroke adjuster on valve can be adjusted for flow rate.

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve tip in solvent
▲ CAM2-SP, valve spare parts kit
▲ B62-0653-SP, system spare parts kit


 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Drop in bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Pound (500 gm) Bottle Maximum

DISPENSE MODE:
Manual

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
None

SUPPLY VOLTAGE:
None

CAM200-1LT-2


Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied to material.
3. Lever on either valve is depressed to begin dispense.
4. Fluid pressure is adjusted to control flow.
5. The stroke adjuster on each valve can be adjusted for individual flow rate.

PVA also offers optional accessories for this system.
▲ Two solvent stands to hold valve tips in solvent
▲ Two CAM2-SP, valve spare parts kit
▲ B62-0762-SP, system spare parts kit


 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Drop in bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Liter Bottle Maximum

DISPENSE MODE:
Manual

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
None

SUPPLY VOLTAGE:
None

CAM200-060-1-S


Description of System Operation:

1. Cartridge of material is placed in metal retainer with air cap.
2. Air pressure is applied to material cartridge.
3. Lever on valve is depressed to begin dispense.
4. Fluid pressure is adjusted to control flow.
5. Stroke adjuster on valve can be adjusted for flow rate.

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve tip in solvent
▲ CAM2-SP, valve spare parts kit
▲ B62-0674-SP, system spare parts kit

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Delrin®
- Teflon®
- Polyethylene

Tank
- Drop in cartridge

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
6 oz. Cartridge Retainer

DISPENSE MODE:
Manual

VALVE TIP:
Plastic Luer-LokTM Adapter

OPERATING AIR PRESSURE:
None

SUPPLY VOLTAGE:
None

FC100-1G-1-FS


 

Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to feed material to valve.
4. Finger switch on valve is depressed to dispense material.
5. Fluid pressure is adjusted to control flow.
6. Stroke adjuster on the valve can be adjusted for flow rate.
7. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ FC1-SP, valve spare parts kit
▲ B62-0769-SP, system spare parts kit

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME:
1 Gallon Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Luer-LokTM Adapter

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

 

FC100-1G-1-H


 

Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied to feed material to valve.
3. Shot timer is set for dispense mode (timed or manual).
4. Trigger is pulled on valve handle to dispense material.
5. Stroke adjuster on the valve can be adjusted for flow rate.

PVA also offers optional accessories for this system.
▲ Solven stand to hold valve handle
▲ FC1-SP, valve spare parts kit
▲ B62-0678-SP, system spare parts kit

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME:
1 Gallon Max

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Luer-LokTM Adapter

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

 

FC100-1G-2H


 

Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied to valve handles.
3. Air pressure is applied to feed material to valves.
4. Triggers on handles are depressed to begin dispensing.
5. Fluid pressure is adjusted to control flow.
6. The stroke adjuster on each valve can be adjusted for individual flow rate.

PVA also offers optional accessories for this system.
▲ Two stands to hold valve handles
▲ Two FC1-SP, valve spare parts kit
▲ B62-0770-SP, system spare parts kit



 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME:
1 Gallon Maximum

DISPENSE MODE:
Manual

VALVE TIP:
Luer-LokTM Adapter

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
None

 

FC100-1LT-1-S


 

Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to feed material to valve.
4. Flexible stand is adjusted for desired height.
5. Fluid pressure is adjusted to control flow.
6. Stroke adjuster on the valve can be adjusted for flow rate.
7. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ FC1-SP, valve spare parts kit
▲ B62-0767-SP, system spare parts kit



 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Drop in Bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Liter Bottle Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Luer-LokTM Adapter

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

 

FC100-1LT-H


 

Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied to valve handle.
3. Air pressure is applied to material.
4. Trigger on handle is depressed to begin dispense.
5. Fluid pressure is adjusted to control flow.
6. Stroke adjuster on the valve can be adjusted for flow rate.

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve handle
▲ FC1-SP, valve spare parts kit
▲ B62-0766-SP, system spare parts kit


 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Drop in Bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Liter Bottle Maximum

DISPENSE MODE:
Manual

VALVE TIP:
Luer-LokTM Adapter

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
None

 

FC100-1LT-H


 

Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Flexible stand is adjusted for desired height.
5. Foot pedal is depressed to begin dispense.
6. Fluid pressure is adjusted to control flow.
7. Stroke adjuster on valve can be adjusted for flow rate.
8. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ FC3-SP, valve spare parts kit
▲ B62-0788-SP, system spare parts kit

 

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME:
1 Gallon Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE TIP:
Luer-LokTM Adapter

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

FCS100-F-1G-1-FS


Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Finger switch is depressed to begin dispense.
5. Fluid pressure is adjusted to control flow.
6. Stroke adjuster on valve can be adjusted for flow rate.
7. Atomizing air pressure is adjusted to spray material.
8. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ FCS1-SP, valve spare parts kit
▲ B62-0794-SP, system spare parts kit

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME:
1 Gallon Max

DISPENSE MODES:
Timed - Manual - Teach

VALVE HEAD:
Flat Spray Cap

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

ATOMIZING AIR PRESSURE:
1 PSI - 15 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

FCS100-F-1G-1-S


Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Flexible stand is adjusted for desired height.
5. Foot pedal is depressed to begin dispense.
6. Fluid pressure is adjusted to control flow.
7. Stroke adjuster on valve can be adjusted for flow rate.
8. Atomizing air pressure is adjusted to spray material.
9. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ FCS1-SP, valve spare parts kit
▲ B62-0793-SP, system spare parts kit

 

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME:
1 Gallon Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE HEAD:
Flat Spray Cap

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

ATOMIZING AIR PRESSURE:
1 PSI - 15 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

 

FCS100-F-1G-H


Description of System Operation:

1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied to valve handle.
3. Air pressure is applied to material.
4. Trigger on valve is depressed to begin dispense.
5. Fluid pressure is adjusted to control flow.
6. Stroke adjuster on valve can be adjusted for flow rate.
7. Atomizing air pressure is adjusted to spray material.

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve handle
▲ FCS1-SP, valve spare parts kit
▲ B62-0728-SP, system spare parts kit

 

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME:
1 Gallon Maximum

DISPENSE MODE:
Manual

VALVE HEAD:
Flat Spray Cap

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

ATOMIZING AIR PRESSURE:
1 PSI - 15 PSI

SUPPLY VOLTAGE:
None

 

FCS100-F-1LT-1-S


Description of System Operation:

1. Bottle of material is placed in pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to material.
4. Flexible stand is adjusted for desired height.
5. Foot pedal is depressed to begin dispense.
6. Fluid pressure is adjusted to control flow.
7. Stroke adjuster on valve can be adjusted for flow rate.
8. Atomizing air pressure is adjusted to spray material.
9. Shot timer is set for dispense mode (timed or manual).

PVA also offers optional accessories for this system.
▲ FCS1-SP, valve spare parts kit
▲ B62-0789-SP, system spare parts kit


 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Drop in Bottle

Material Line
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1 Liter Bottle Maximum

DISPENSE MODES:
Timed - Manual - Teach

VALVE HEAD:
Flat Spray Cap

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

ATOMIZING AIR PRESSURE:
1 PSI - 15 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

 

FCS100-F-SYR-H


Description of System Operation:

1. Syringe of material is threaded onto Luer adapter of valve.
2. Air adapter head is placed onto syringe.
3. Air pressure is applied to valve handle.
4. Air pressure is applied to syringe of material.
5. Trigger on valve is depressed to begin dispense.
6. Fluid pressure is adjusted to control flow.
7. Stroke adjuster on valve can be adjusted for flow rate.
8. Atomizing air pressure is adjusted to spray material.

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve handle
▲ FCS1-SP, valve spare parts kit
▲ B62-0794-SP, system spare parts kit



 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Material Reservoir
- Syringe

Material Fitting
- Female Luer-LokTM Adapter

MAXIMUM MATERIAL PRESSURE:
60 PSI

TANK VOLUME:
Syringe: 3, 5, 10, 30, 55 cc

DISPENSE MODES:
Manual

VALVE HEAD:
Flat Spray Cap

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

ATOMIZING AIR PRESSURE:
1 PSI - 15 PSI

SUPPLY VOLTAGE:
None

 

MCCS-SYS-1


Manual Conformal Coating System
? Spray and dispense from one reservoir

Description of System Operation:
1. Material is poured into stainless steel pressure pot.
2. Air pressure is applied to valve handles.
3. Air pressure is applied to feed material to valves.
4. Triggers on handles are depressed to begin dispensing.
5. Fluid pressure is adjusted to control flow.
Spray Valve
6. Stroke adjuster on valve can be adjusted to control flow rate.
7. Atomizing air pressure is adjusted to spray material.
Dispense Valve
9. Stroke adjuster on valve can be adjusted to control flow rate.

PVA also offers optional accessories for this system.
▲ Two solvent stands to hold valve handles
▲ FCS1-SP, spray valve spare parts kit
▲ FC1-SP, dispense valve spare parts kit
▲ B62-0800-SP, system spare parts kit

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valves
- Stainless Steel
- Teflon®
- Viton®

Tank
- Stainless Steel

Material Lines
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

TANK VOLUME
1 Gallon Maximum

DISPENSE MODE:
Manual

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

FIRST VALVE HEAD:
Flat Spray Cap

ATOMIZING AIR PRESSURE:
1 PSI ?- 15 PSI

SECOND VALVE TIP:
Luer-LokTM Adapter

SUPPLY VOLTAGE:
None

 

MCCS-SYS-2


Manual Conformal Coating System
? Spray one material from one pressure tank
? Dispense a second material from a cartridge

Description of System Operation:
1. First material is poured into stainless steel pressure pot.
2. Second material cartridge is placed in reservoir.
3. Air pressure is applied to valve handles.
4. Air pressure is applied to feed both materials to valves.
5. Triggers on handles are depressed to begin dispensing.
6. Fluid pressure is individually adjusted to control flow.
Spray Valve
7. Stroke adjuster on valve can be adjusted to control flow rate.
8. Atomizing air pressure is adjusted to spray material.
Dispense Valve
9. Stroke adjuster on valve can be adjusted to control flow rate.

PVA also offers optional accessories for this system.
▲ Two solvent stands to hold valve handles
▲ FCS1-SP, spray valve spare parts kit
▲ FC1-SP, dispense valve spare parts kit
▲ B62-0801-SP, system spare parts kit

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valves
- Stainless Steel
- Teflon®
- Viton®

1st Tank
- Stainless Steel

2nd Tank
- Cartridge Retainer

Material Lines
- UV Safe Teflon®

MAXIMUM MATERIAL PRESSURE:
100 PSI

FIRST TANK VOLUME
1 Gallon Maximum

SECOND TANK VOLUME
12 oz Cartridge Retainer

DISPENSE MODE:
Manual

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

FIRST VALVE HEAD:
Flat Spray Cap

ATOMIZING AIR PRESSURE:
1 PSI - 15 PSI

SECOND VALVE HEAD:
Luer-LokTM Adapter

SUPPLY VOLTAGE:
None

 

MV100-SYR-1-S


Description of System Operation:
1. Syringe of material is threaded onto Luer adapter of valve.
2. Air adapter head is placed onto syringe.
3. Air pressure is applied from controller to valve.
4. Air pressure is applied to syringe of material.
5. Flexible stand is adjusted for desired height.
6. Foot pedal is depressed several times for purging.
7. Stroke adjuster on valve can be adjusted for shot size.

PVA also offers optional accessories for this system.
▲ MV1-SP, valve spare parts kit
▲ B62-0796-SP, system spare parts kit


 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Material Reservoir
- Syringe

Material Fitting
- Female Luer-LokTM Adapter

MAXIMUM MATERIAL PRESSURE:
60 PSI

TANK VOLUME:
Syringe: 3, 5, 10, 30, 55 cc

DISPENSE MODE:
Manual

VALVE TIP:
Male Threaded Tip

SHOT SIZE RANGE:
0.0001 to 0.0022 cc

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

 

MV200-1LT-1-S



Description of System Operation:
1. Bottle of material is placed in pressure pot.
2. Air pressure is applied from controller to valve.
3. Air pressure is applied to feed material to valve.
4. Flexible stand is adjusted for desired height.
5. Foot pedal is depressed several times for purging.
6. Stroke adjuster on valve can be adjusted for shot size.

PVA also offers optional accessories for this system.
▲ MV2-SP, valve spare parts kit
▲ B62-0798-SP, system spare parts kit


 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Tank
- Drop in Bottle

Material Line
- UV Safe Teflon?

MAXIMUM MATERIAL PRESSURE:
70 PSI

TANK VOLUME:
1-Liter Bottle Maximum

DISPENSE MODE:
Manual

VALVE TIP:
Luer-LokTM Adapter

SHOT SIZE RANGE:
0.0015 to 0.010 cc

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

MV200-SYR-1-S




Description of System Operation:
1. Syringe of material is threaded onto Luer adapter of valve.
2. Air adapter head is placed onto syringe.
3. Air pressure is applied from controller to valve.
4. Air pressure is applied to syringe of material.
5. Flexible stand is adjusted for desired height.
6. Foot pedal is depressed several times for purging.
7. Stroke adjuster on valve can be adjusted for shot size.

PVA also offers optional accessories for this system.
▲ MV2-SP, valve spare parts kit
▲ B62-0797-SP, system spare parts kit

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Material Reservoir
- Syringe

Material Fitting
- Female Luer-LokTM Adapter

MAXIMUM MATERIAL PRESSURE:
60 PSI

TANK VOLUME:
Syringe: 3, 5, 10, 30, 55 cc

DISPENSE MODE:
Manual

VALVE TIP:
Luer-LokTM Adapter

SHOT SIZE RANGE:
0.0015 to 0.010 cc

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
110 volt / 220 volt

 

MV200-SYR-H



Description of System Operation:
1. Syringe of material is threaded onto Luer adapter of valve.
2. Air adapter head is placed onto syringe.
3. Air pressure is applied to valve handle.
4. Air pressure is applied to syringe of material.
5. Trigger on handle is depressed several times for purging.
6. Stroke adjuster on valve can be adjusted for for shot size.

PVA also offers optional accessories for this system.
▲ Solvent stand to hold valve handle
▲ MV2-SP, valve spare parts kit
▲ B62-0799-SP, system spare parts kit

 

 


SYSTEM SPECIFICATIONS
WETTED COMPONENTS:

Valve
- Stainless Steel
- Teflon®
- Viton®

Material Reservoir
- Syringe

Material Fitting
- Female Luer-LokTM Adapter

MAXIMUM MATERIAL PRESSURE:
60 PSI

TANK VOLUME:
Syringe: 3, 5, 10, 30, 55 cc

DISPENSE MODE:
Manual

VALVE TIP:
Luer-LokTM Adapter

SHOT SIZE RANGE:
0.0015 to 0.010 cc

OPERATING AIR PRESSURE:
80 PSI - 100 PSI

SUPPLY VOLTAGE:
None